Metal Cannon Smoker Oil Tube Model Modification for Henglong Tank Universal Military Remote Control Car

Description

The metal rear smoke exhaust is suitable for the modification of models such as the 6 series and 7 series remote-controlled tanks of the Henglong 1/16 series, as well as other brands of tow truck remote-controlled warships.

Usage matters:

1. The battery should be a 6-7.2V nickel hydrogen battery or a 6-7.4V lithium battery, and high-voltage electricity should not be used.

2. Connect the wires of the blower and the smoke generator in parallel at the output end of the electric regulator (i.e. the wire output to the motor can also be welded to the positive and negative poles of the motor). Prolonged high-speed operation may burn out the blower motor, so please be cautious when implementing throttle linkage!!!

3. The smoke generator has a refueling test before leaving the factory. After arrival, there is no need to refuel and it can be used directly. When the oil is used, it can be refueled (specifically, the smoke is significantly reduced). Each time, about 2-3 milliliters are refueled. Adding too much will cause the internal structure to be too wet and blow into the pipe, blocking the pipe and preventing smoke from coming out. If too much is added, remove the smoke generator and use a tissue to remove some of the oil.

4. The gearbox plug is manufactured as XH2.54, and the original 6 and 7 series motherboards directly correspond to the CN11 and CN12 sockets for use. Modify the plugs used in other cars on your own. Installation requires a certain level of hands-on ability, as well as comparing whether the internal space of your own car is sufficient for installation and placement. The fixing method and placement should be handled according to your own vehicle body.

5. The smoke outlet shown in the picture is the refueling port, which is connected. You can choose any port to refuel.